ArcaMax

To see Old Glory waving in the wind always brings a sense of pride to most of us. This is especially true during holidays like the Fourth of July. So if you’re considering installing a flagpole on your property, a good choice is a telescoping pole with aluminum sections that slide up and down and snaps in place.

A contractor will charge $1,220, which includes labor and material, to install a 25-foot pole in concrete. You can buy a flagpole kit for $700 and install it yourself. The kit includes a 25-foot pole with an installation sleeve and gold ball top, a 3-foot-by-5-foot flag and swivel rings and harness that allow the flag to fly freely. Another cost is $50 for concrete mix and gravel for its foundation.

The project involves digging a round hole approximately 28 inches deep by 12 inches in diameter, then adding approximately six inches of small gravel for drainage in the bottom of the hole. Insert the bolt in the sleeve and fill in the area around it with concrete. Use a carpenter’s level to make sure it is level.

For more information about installing a flagpole and flag etiquette, go to www.uncommonflagpoles.com.

Pro Cost: $1,220 — DIY Cost: $750 — Pro time: 7.2
DIY Time: 10.0 — DIY Savings: $470 — Percent Saved: 39%

========

To find more DIY project costs and to post comments and questions, visit www.diyornot.com and m.diyornot.com on smartphones.

©2026 Gene and Katie Hamilton. Distributed by Tribune Content Agency, LLC.